Service/Maintenance; Consumables - Dustcontrol Tromb Twin Serie Traducción Del Manual De Instrucciones De Servicio Original

Service/Maintenance

Cleaning
The machine must be switched off and unplugged before cleaning and maintenance.
Filter replacement
The fine filter must be replaced at least once a year. Only OEM filters may be used. HEPA filters must be replaced after 300
hours.
WARNING
Filter replacement may only be performed by trained personnel. Use a protective mask and suitable
equipment.
Motor
The typical service life of a fan motor's original brushes is 600-700 hours. The brush can be replaced. The service life of the
second brush set is approx. 400 hours, while that of the third set is approx. 300 hours. After this time, the motor is considered
worn out and should be replaced.
Overheating
If the machine is at risk of overheating (for example, as a result of powerful throttling), the temperature guard will trip and the
machine will stop. The operator must then press the power switch to the OFF position, unplug from the mains and wait 3-5
minutes for the machine to cool down. Then reset the temperature guard by pressing the RESET button. Reconnect the power
cord to the electrical outlet and restart the machine by pressing the power switch to the ON position.
Regular checks
The machine must be tested and inspected at least once a year due to its use with hazardous materials. Worn parts must be
replaced. Never risk functionality and service life. Only use genuine parts.

Consumables

Description
Coupling socket
Coupling socket
Hose Ø=50
HEPA filter
Fine filter, polyester with integrated filter guard
Fine filter, cellulose with integrated filter guard
Plastic bag, 50 pcs
Intellibag, 10 pcs/roll
Plastic bag Longopac
For spare parts, see the Dustcontrol
18
Part No.
2008
2129
2013
44016
44017
44043
4314
43619
432177
website.
Tromb Twin, Art.nr. 99039-A