Using V.A.C. Veraflo™ Dressing In Conjunction With Bandages, Garments Or Off-Loading Devices - GD V.A.C.ULTA Manual Del Usario

UsiNg V.A.C. VerAflo™ dressiNg iN CoNjUNCtioN With
bANdAges, gArmeNts or off-loAdiNg deViCes
fig. 38
Layer 1
fig. 44
1. Apply V.A.C. VeraFlo Cleanse™ Dressing and V.A.C.
in the previous sections.
2. Carefully cut a 3 cm hole in the V.A.C.
V.A.C. Verat.r.A.C.™ Pad Application section (fig. 38, fig 39).
3. Cut V.A.C. Advanced Drape in half (fig. 40).
®
4. Apply additional V.A.C.
(fig. 41, fig. 42). Ensure that the draped area will be larger than the foam bridge.
5. Cut an appropriately sized piece of V.A.C. VeraFlo™ Dressing for the bridge (fig. 43 and
fig. 44).
CAUtioN: Bridge length should be as short as possible to ensure efficient fluid flow.
fig. 39
3
cm
fig. 42
fig. 41
fig. 45
2.5
cm
fig. 47
Advanced Drape over intact skin where the bridge will be applied
®
fig. 48
Advanced Drape to wound as described
®
Advanced Drape (not a slit) as described in the
®
29
fig. 40
fig. 43
fig. 46
Off-loading
Boot