Powermate PWSTMEA Manual Del Operador página 4

Important Safety Information
• Save all instructions
Fuel Safety
WARNING
• Gasoline is extremely flammable and gasoline vapors can explode if ignited . Handle with care .
• Use an approved container .
• Check fuel supply before each use, allowing space for expansion as the heat of the engine and/or sun can cause
fuel to expand .
• Fill fuel tank outdoors with extreme care . Never fill fuel tank indoors .
• Never remove gas cap or add fuel with the engine running . Allow engine to cool before refueling .
• Do not smoke while refueling .
• After refueling, replace fuel tank cap securely and wipe up spilled fuel .
Storage Safety
• Always refer to the operator's manual instructions for important details if the Edger is to be stored for an
extended period .
• Never store the Edger with fuel in the fuel tank inside a building where ignition sources are present such as water
heaters, space heaters, clothes dryers, etc .
• To reduce fire hazard, keep Edger free of grass, leaves or other debris build-up
• Allow the engine to cool before storing in any enclosure .
Repair, Maintenance, and Adjustment Safety
• After striking a foreign object, stop the engine . Remove the wire from the spark plug and keep the wire away from
the plug to prevent accidental starting . Thoroughly inspect the Edger for any damage . If damaged, have the
equipment repaired by a trained technician before restarting and operating .
WARNING
• Stop the engine before cleaning, repairing or inspecting the unit . Make sure all moving parts have stopped . Let the
engine cool, disconnect the spark plug wire and move it away from the spark plug .
• Never attempt to make any adjustments while the engine is running except when specifically recommended by
the manufacturer .
• Keep the Edger in a safe working condition . Check all fasteners at frequent intervals for proper tightness .
• When servicing or repairing the Edger, do not tip the machine over or up unless specifically instructed to do so in
this manual . Service and repair procedures can be done with the Edger in an upright position . Some procedures will
be easier if the machine is lifted on a raised platform or working surface .
• Use only original equipment or authorized replacement parts .
• Never tamper with safety devices . Check their proper operation regularly .
• Do not change the engine governor setting or over-speed engine .
• Clean and replace safety and instruction decals as necessary .
• To guard against engine over-heating, always have engine debris filter mounted and clean .
Children Safety
WARNING
• Tragic accidents can occur if the operator is not alert to the presence of children .
• Keep children out of the edging area and under the watchful care of a responsible adult .
• Never assume that children will remain where you last saw them .
• Be alert and turn Edger off if children enter the area .
• Before and while moving backwards, be aware of small children .
• Never allow children to operate the Edger .
• Use extra care when operating near blind corners, shrubs, trees, or other objects that may obstruct vision .
Questions? Call Toll Free at 1-800-737-2112
(CONTINUED)
EN-4
Copyright © 2018 MAT Engine Technologies, LLC