Star SP200 Serie Manual Del Usuario página 11

Paper
insertion
slit
Upper paper
Print head
Paper outlet
FEED switch
8 Insert the tip of the roll paper in the auto cutter
• When using copying paper, insert only the original
Auto cutter
Paper insertion
slit
Platen
Lower paper
9 Pull on the edge of the paper to remove any slack
0 Insert the paper through the paper outlet and then
Auto cutter
– 11 –
paper slit.
(the upper paper) into the slit of the auto cutter.
Insert the paper which is to be copied (the lower
paper) between the platen and the auto cutter.
Paper insertion
slit
Print head
and then lower the auto cutter.
replace the cover by reversing the removal steps.
Note: When the paper end mark appears on the
paper, replace the roll paper before it runs
out.
Auto cutter
Upper paper
Lower paper
Platen