Consumable Parts - Star SP200 Serie Manual Del Usuario

Consumable Parts

When consumable parts have run out, use those specified in the table below.
(1) Roll paper specifications
Paper type:
Paper width:
Roll diameter:
Internal diameter of roll:
Thickness: Tear bar model
Auto cutter model (single) 70 µm to 100 µm
(2) Ink ribbon specifications
Ribbon type:
Color:
Ribbon material:
Ribbon life:
Ordinary bond and carbonless copy paper
76±0.5 mm (3.0 inches)
ø85 mm (3.35 inches) max.
ø12±1 mm
Note: The paper must not be glued to the core.
(single) 70 µm to 100 µm
(copies) Original + 2 copies (Max. 200 µm)
(copies) Original + 1 copies (Max. 100 µm)
Note: The auto-cutter built into this auto cutter model has been
designed for a maximum paper thickness of 100
This thickness is rated to a maximum paper capacity of
2 ply paper, were each sheet is set at 50
µm
ing the 100
tion will not insure proper cutting.
Cartridge cassette
SP212/242 type: Single color (Purple or black)
SP216/246 type: Two color (Black and red)
Nylon 66 (#40 denier)
Single color:
Purple 3,000,000 characters
Black 1,200,000 characters
Two color:
Black on two color 600,000 characters
Red on two color 300,000 characters
– 5 –
paper thickness auto-cutter specifica-
µm
.
µm
. Exceed-