Asssembling The Easyquick; Positioning The Easyquick In Place And Removing It; Valve Nut - AMC EasyQuick Manual De Instrucciones

EN
3.2

Asssembling the EasyQuick

� Screw on Visiotherm E
� Place and hold the valve housing on the outside of the lid.
ƒ Valve outlet points to the outside
� Insert valve indicator into valve housing
� Screw on sturdily with valve nut
Check both sides to ensure the valve indicator can operate smoothly
Insert sealing ring:
� For the EasyQuick, only insert the sealing ring (20 cm or 24 cm) that matches the pot.
� Press firmly all the way around so that the sealing ring fits in the rim exactly as it should.
For the Oval EasyQuick sealing ring (see Drawing A), insert it using the white mark as an aid
� Press firmly all the way around so that the sealing ring fits in the rim exactly as it should
A
3.3

Positioning the EasyQuick in place and removing it

� Place the EasyQuick on a suitable pot so that the entire circumference of the sealing ring
rests on the pot's pouring rim.
� Check that the Oval EasyQuick is sitting correctly by pressing on the Visiotherm E
ƒ The yellow valve indicator jumps up briefly.
� Hold a pot handle when removing the EasyQuick
16
24 cm
20 cm