Floor Temperature Limits - Aube Technologies TH114-A Guía Para El Usuario

Owner's Guide
Floor temperature limits (AF mode only)
The minimum and maximum floor temperature limits are available only if the temperature control mode is AF (see page 9).
If the floor temperature drops below the minimum limit or rises above the maximum limit, the thermostat will turn heating On
or Off respectively, regardless of the ambient temperature, to maintain the floor temperature within the set limits.
NOTE: The desired ambient temperature might not be attainable if the maximum floor temperature is set too low.
The minimum and maximum floor temperature limits are factory-set at 10 °C (50 °F) and 28 °C (82 °F) respectively. To
modify the limits, proceed as follows:
WARNING: To avoid damaging your floor, follow your floor supplier's recommendations regarding floor temperature limits.

Switch the thermostat to Off or Standby.

While pressing either
ature limit settings.

Press the Backlight button briefly to switch between minimum and maximum floor temperature
settings.

Press the buttons to set the desired limit.

Press the Backlight button for 3 seconds to save your modifications. After the data are saved,
the thermostat displays the current temperature or "– –".
NOTE: Your modifications are automatically saved if no button is pressed for 60 seconds.
button, switch the thermostat back to On to access the floor temper-
10