Main Features - MO-EL MO-BUTTERFLY 700 Uso Y Mantenimiento

Glued paper
dimensions
The technical data indicated in this booklet can change without any prior ad-
vice from manufacturer.

MAIN FEATURES

• Structure: Aluminium appropriated to be used in foodprocessing
environments.
• Cover: plexiglass (PMMA), which is transparent at the UV-A radia-
tion of the lamps. It makes the appliance shatter-proof, because
in case of breaking of the lamps it avoid to contaminate the envi-
ronment where the device is placed.
• Protection degree: IP55, it means that the appliance is protected by
water spouts, and this allows its utilisation both inside and outside
even in environments with high levels of humidity.
HOW THIS APPLIANCE WORKS
The special UV-A lamps are set to attract all flying insects to the appli-
ance. When insects approach, they remain stuck on the glued paper
(supplied as a spare part).
This appliance allows monitoring and capturing the flying insects within
the environment nearby.
INSTALLATION
• Both the appliances 700 and 701 can be wall mounted (Fig. 1-2-7).
• The art.700 can be hanged on the ceiling (Fig. 5).
• The art.701 can be installed on a flat surface (Fig. 9).
An electrical outlet must be present nearby.
Position the appliance preferably at a height of about 6,5 feet, placing
it in the darkest area of the room, far from windows. This because the
appliance must eliminate insects from indoor and must avoid to attract
other of them from outdoor inside the room.
When wall mounted, it must be fixed with two screws placed on the
wall.
TECHNICAL FEATURES
Lenght
Width
10
345 mm
170 mm