Changing The Tv Audio Channel; Special Playback Options - Insignia NS-DVDR1 Guia Del Usuario

Changing the TV audio channel

Some TV programs are broadcast with both a
main and a Secondary Audio Program (SAP).
You can change the TV audio.
To change the TV audio:
• Press AUDIO repeatedly to change between
the available TV audio options.
• STEREO+SAP Audio Signal
Stereo – SAP – Mono – Stereo
• STEREO Audio Signal
Stereo – L – R – Mono – Stereo
• SAP Audio Signal
Mono – SAP – Mono
• MONO Audio Signal
Mono
The current audio channel is displayed
on-screen.
• If SAP is selected, but there is no SAP
channel being broadcast, you still hear the
main audio (Mono or Stereo) channel.
• If the sound is poor quality when set to
Stereo, you can often improve it by
changing to Mono.

Special playback options

If a menu screen is displayed
In some cases, the disc menu might appear.
Press the
/
title/chapter you want to view, then press ENTER
to start. Press TITLE or DISC MENU/LIST to
return to the menu screen.
Moving to another Title
When a disc has more than one title, you can
move to another title as follows.
To move to another title:
1 Press DISPLAY twice during playback then
press / to select the title icon.
2 Press the appropriate numbered button (0-9)
or to select a title number.
/
Time search
DVD ALL
To start playing at a selected time on the disc:
1 Press DISPLAY twice during playback. The
time search box shows the elapsed playing
time.
2 Press / to select the time clock icon.
The time input box [-:--:--] appears.
3 Input the required start time in hours,
minutes, and seconds from left to right. If you
enter the wrong numbers, press
move curser to the wrong number. Then
enter the correct number.
4 Press ENTER to confirm. Playback starts
from the selected time.
Marker search
To enter a marker:
1 Press MARKER at the desired point on the
disc. The Marker icon briefly appears on the
TV screen.
2 Repeat to enter up to six markers.
16
/ buttons to select the
DivX
DVD ALL
DivX
to
/
DVD ALL
www.insignia-products.com
To recall or clear a marked scene:
1 During disc playback, press SEARCH.
marker search menu appears on the screen.
2 Press
/
scene that you want to recall or clear.
3 Press ENTER. Playback starts from the
marked scene.
- OR -
Press CLEAR and press
then press ENTER to delete marked scene
from the list.
4 To remove the Marker Search menu, press
RETURN ( ).
Camera angle
DVD
If the disc contains scenes recorded at different
camera angles, you can change to a different
camera angle during playback.
To change the camera angle:
1 Press DISPLAY, then select the Camera
Angle icon during playback.
2 Press to select the angle you want.
/
Note that the number of the current angle
appears on the display.
Tip
The Camera Angle icon is displayed on the
TV screen when alternate angles are
available.
3D surround sound
DVD ALL
Your recorder can produce a 3D Surround sound
effect, which simulates multi-channel audio
playback from two conventional stereo speakers,
instead of the five or more speakers normally
required to listen to multichannel audio from a
home theater system.
To turn on 3D surround sound:
1 Press DISPLAY twice, then press
select the
sound icon.
2 ress to
P /
3 To turn off the 3D Surround effect, select
NORMAL
.
Last scene memory
DVD
Your recorder memorizes last scene from the
last disc that is viewed. The last scene remains
in memory even if you remove the disc from the
recorder or switch off the recorder. If you load a
disc that has the scene memorized, the scene is
automatically recalled.
Note •
Settings are stored in memory for use at
any time.
•
Your recorder does not memorize settings
of a disc if you switch off the recorder
before you play it.
• The
Last Scene Memory function for a
previous DVD title is erased once a different
DVD title is played.
NS-DVDR1 DVD Recorder
The
/ to select a marked
to select OK,
/
DivX
/
3D SUR.
select
to