Progressive Scan - Insignia NS-DVDR1 Guia Del Usuario

NS-DVDR1 DVD Recorder
Regional code
Your recorder has a regional code printed on the
back of the case. Your recorder can play only
DVDs labeled with the same regional code or
ALL.
Note • Most DVDs have a globe with one or
more numbers in it clearly visible on
the cover. This number must match
your recorder's regional code or the
DVD cannot play.
• If you try to play a DVD with a different
regional code from the recorder, the
message "Check Regional Code"
appears on the TV screen.
1
Item Description
1
POWER
button
2 Disc tray (DVD
deck)
3 Display window
4
OPEN/CLOSE
button
5 PROGRESSIVE
SCAN
6
(Play/Pause)
button
7
(STOP)
button
Function
Turns the recorder on and off.
Place a disc on the tray when it
opens.
Shows the current status of
the recorder.
lights when the recorder is
in timer recording or when a
timer recording is
programmed.
REC
lights when the
recorder is recording.
indicates total
playing time, elapsed time,
remaining time, or current
deck status.
Press to open or close the disc
tray.
Sets the output resolution to
480p format for progressive
scan mode.
Press to start playback. When
a DVD or video cassette is
playing, press to pause
playback. Press again to
resume playback.
Press to stop the playback of
the DVD or video cassette.
www.insignia-products.com
Using progressive scan
Consumers should note that not all high
definition televisions are fully compatible with
this recorder and may cause artifacts to be
displayed in the picture.
In case of progressive scan picture problems, we
recommend that you switch the connection to
the standard definition output. If there are
questions regarding your television's
compatibility with this DVD recorder, contact our
customer service center.
Controls and connections
Front panel
6
4
3
2
5
12 13
11
Item Description
8
(REC)
button
9
CH or
buttons
10 Remote sensor
11 DV IN
12 INPUT 2
(S-VIDEO IN)
13 INPUT 2
(VIDEO IN
/AUDIO IN
(Left/Right)
8
9
7
10
Function
Press to start recording. Press
repeatedly to set the recording
time (duration).
Press to change the channels.
Receives signals from the
remote control.
Connect the digital video
output of a digital camcorder to
this jack.
Connect the S-Video output of
an external source (such as a
TV, monitor, or VCR to this
jack.
Connect the audio/video
output of an external source
(such as an audio system, TV,
monitor, VCR, or camcorder)
to these jacks.
5