Online Registration - Linksys WVC54GCA Guia Del Usuario

Chapter2
14 . Review the Camera's settings . To make changes to the
settings, click Back to go back to the previous screen .
If the settings are correct, click Save to continue .
Save the Camera Settings
15 . When the Wizard informs you that the new Camera
settings have been saved, click Continue .
16 . Disconnect the power from the camera . Click Next .
Disconnect the Power
17 . Disconnect the network cable from the Camera and
from your switch or router . Click Next .
Disconnect the Network Cable
Wireless-G Internet Home Monitoring Camera
Setting Up and Mounting the Camera
18 . Reconnect the power to the Camera . Click Next .
Reconnect the Power
19 . The Setup Wizard displays Camera successfully
connected to network . Click Continue, then click
Next on the following screen .
Camera Successfully Connected to Network
Camera Connected to Wireless Network
20 . The Congratulations screen appears .
Install Camera Utility Click this to install the Camera's
•
Utility .
•

Online Registration

Click this to register your Camera
online .
Exit
• Click this to exit the Setup Wizard and install the
Camera's utility later .
Go to the "Placement Options" section.
6