Linksys WVC54GCA Guia Del Usuario página 20

Chapter3
Video Control Buttons
The video control buttons are located along the lower
left edge of the viewing area . These buttons act upon the
selected Camera as explained below .
Button Function
View Click this button to view the
current video .
Record Click this button to record* the
current video .
Snapshot Click this button to take a
snapshot of the current video image .
Zoom Click this button to zoom into
current video display . The zoom factor
cycles through 1x, 2x, and 4x .
Flip
Click this button to flip the current
video display top-to-bottom .
Mirror Click this button to reverse the
current video display left-to-right .
Sound Click this button to toggle the
sound on or off .
Volume Slide this bar upward to increase
the volume . Slide the bar downward to
decrease the volume .
* During recording, the Utility's System Tray icon turns
into an animated icon (arrow moves up and down) . When
recording ends, the icon reverts to its original state .
Recording In Progress
Playback Window
The Playback window is used to play back videos that you
have recorded and saved .
Playback Screen
Wireless-G Internet Home Monitoring Camera
No Recording In Progress
Installing and Using the Camera Utility
Video Selection
This section of the Playback window lets you select the
video(s) for playback .
Playback Selection
Open Video Click this button if you want to select the
folder containing the videos on your computer . Otherwise,
use the remaining fields to select the video from the
default recording folder (indicated by the Recording Path
field of the Setup > Preferences screen) .
Select Camera Select the Camera that recorded the
video .
Recording Methods
Specify the criteria to be used to
select the video for the selected Camera:
All Records Displays all recorded videos for the
•
selected Camera .
• Select Period Limits the video selections to the range
defined by Start Date/Time and End Date/Time .
Motion Detection Limits the selections to videos that
•
were recorded as a result of motion detection .
If the Recording Methods field is set to Select Period,
define the date and time period by filling in the following
fields .
Start Date Specify the starting date in mm-dd-yyyy
•
format .
• Start Time Specify the starting time in hh:mm:ss
format .
End Date
• Specify the ending date in mm-dd-yyyy
format .
End Time Specify the ending time in hh:mm:ss
•
format .
Play Click this button to begin playing the selected
videos .
1