Setup > Administration - Linksys WVC54GCA Guia Del Usuario

Chapter4
Estimated Bit Rates for Video Viewing or Recording
Resolution Quality Level
640 x 480 Very High
640 x 480 High
640 x 480 Normal
640 x 480 Low
640 x 480 Very Low
320 x 240 Very High
320 x 240 High
320 x 240 Normal
320 x 240 Low
320 x 240 Very Low
160 x 128 Very High
160 x 128 High
160 x 128 Normal
160 x 128 Low
160 x 128 Very Low
Mobile Settings
Enable Mobile Streaming
video streaming to a mobile device .
Video Adjustments
Power Line Frequency
Select the power line frequency
(0Hz or 60Hz) used in your region, to improve the picture
quality under fluorescent lighting .
White Balance Select the desired option to match the
current environment and lighting .
Brightness
If necessary, you can adjust the brightness to
obtain a better image . For example, if the camera is facing
a bright light, the image may be too dark . In this case, you
can increase the brightness . You can select a Brightness
value between - and  .
Sharpness Select the desired option for the sharpness .
You can select a Sharpness value between - and  .
Options
Enable Microphone Select this to enable audio . Using
Audio increases the bandwidth requirements slightly .
Enable Time Stamp Select this to display a time stamp
on the video .
Enable Text Display To display text on the video, select
this, then enter up to 20 characters in the field .
To save your changes, click Apply . To cancel any unsaved
changes, click Cancel . To get additional information about
the screen's features, click Help .
Wireless-G Internet Home Monitoring Camera
Advanced Configuration with the Web-based Utility
Bit Rate in kbps
4000
3200
1200
480
160
1000
800
300
120
40
800
400
200
100
40
Select this option to enable
Setup > Administration
The Setup > Administration screen allows you to change
the Camera's login name and password, reset the factory
defaults, upgrade the firmware, and set the language .
Setup > Administration Screen
Login
These fields are used to change the login name and
password used to access the Camera . For security purposes,
you should change these from the default values (both set
to admin) .
Login Name Enter the login name for the Camera .
Password Enter the password for the Camera .
Verify Password Re-enter the password to verify .
Restore Factory Defaults
Restore Defaults To restore the Camera to its factory
default settings, click Restore Defaults .
NOTE:
This will overwrite the Camera's settings
with the factory defaults . Any changes you
made to the Camera's settings will be lost; you
will not be able to recover them .
Firmware Upgrade
Upgrade Firmware New firmware versions are posted at
www.linksys.com/international and can be downloaded
for free . If the Camera is functioning satisfactorily, there
is no need to download a newer firmware version, unless
that version has a new feature that you want to use .
Loading new firmware onto the Camera does not always
enhance its performance .
Linksys recommends that you upgrade the Camera's
firmware within your network; in other words, use a
computer within the Camera's local network . If you
attempt to upgrade the Camera's firmware from a remote
location—using a computer outside of the Camera's local
network—the upgrade will fail .
1