Descargar Imprimir esta página

Mark MINIBEAM XTREME Instrucciones De Usuario página 5

Publicidad

Idiomas disponibles

Idiomas disponibles

The product must not be operated during thunder storms;risk of destruction from surge voltages!
5. Installation
This product can be operated suspended or as stand-alone system.
Should your lighting effect show any signs of damage,do not install the device!In this case,have your
lighting effect repaired by your specialized dealer.The manufacturer does not accept responsibility or
liability for damage to property or personal injury resulting from an improperly installation!
As a stand-alone system the device must be installed vertically on an absolute planar,firm,fireproof,shock
and vibration-free surface.The installation of this lighting effect must be carried out by trained and
professional staff!The installation of this lighting must only be carried out with the appropriate materials!
The suspended installation of this lighting effect necessitates a suitable suspension system!The lighting
effect must never be fixed swinging freely in the room.No individuals should linger underneath the lighting
effect during suspended installation!
The light effect unit must be attached via two certified hooks and omega bracket to a tie-bar system.Use the
screw threads on the undersurface only.
It must be ensured that an expert inspects the mechanical and safety-relevant installation prior to the initial
operation and following major modifications,prior to the renewed operation.It must be ensured that an
expert inspects the mechanical and safety-relevant installation at least once a year.It must be ensured that
an expert inspects the mechanical installation and the installation of relevance to safety within the
framework of an acceptance test at least every four years.
The installation fixture must be as such that it can withstand for a period of 60minutes 10 times the load
capacity without harmful deformation.
It is prohibited for any individual to unnecessarily stay or pass beneath the installation during any type of
assembly work
.
The light effect unit must be secured by a safety cables.
6. Operation
MINIBEAM XTREME
ATTENTION:
RISK OF SHORT CIRCUIT!
ATTENTION:
RISK OF SHORT CIRCUIT!
5
User Manual/Manual de uso
P 4
EN

Publicidad

loading