Cleaning The Fan - Boneco W200 Manual De Instrucciones

CLE ANING THE FAN

CLEANING THE FAN

To clean the fan blades, remove the screen using the fra-
grance container.
Clean the fragrance container thoroughly if there is
any fragrance residue left over (see page 9). It
only takes a few drops to discolor or even damage
the housing of the BONECO W200.
1. Remove the fragrance container.
2. Use the key for the openings provided in the screen.
3. Turn the key around 90 degrees and carefully lift
the screen. Repeat this step in all corners until the
screen can be completely removed.
4. Clean the fan and the inner area with a damp cloth.
5. Replace the screen. Carefully press down on all four
corners until they audibly click into place.
Do not operate the appliance without a protective
screen!
13
en