Controls - Description 512 - 712; Fitting The Side Brush - IPC 512 Serie Manual De Instrucciones

brush on the floor.
Accelerator knob (fig. A, ref. 9), sets the speed of the machine.
Front flap raising knob (fig. A, ref. 10), raises the front flap to collect bulky debris.
Side brush lifting lever (fig. A, ref. 11): raises and lowers the side brush.
Direction selector (fig. C, ref. 7): sets movement of the machine to forwards or reverse
Display (fig. C, ref. 8). displays alarm codes
Brake (fig. A, ref. 12): parking brake (ACTIVATED VIA THE WHITE LEVER) and service
brake
START generator (fig. A, ref. 17): Electric starting internal combustion engine
6.2. Controls – Description 512 – 712
With reference to fig. C, the machine has the follow controls and indicator lights:
On/OFF switch (fig. C, ref. 1): turns the machine on and off
Suction button (fig. C, ref. 2): enables/disables the suction function.
Filter shaker button (fig. C, ref. 4): enables the filter shaker.
Battery charge LED (fig. C, ref. 5): 3 LEDs indicating the battery charge:
green light battery fully charged
yellow light battery almost flat, recharge
red light battery flat
Centre brush pressure regulation handle (fig. B, ref. 8): regulates the pressure of the
brush on the floor.
Drive knob (fig. B, ref. 9), enables the drive of the machine.
Front flap raising knob (fig. B, ref. 10), raises the front flap to collect bulky debris.
Side brush lifting lever (fig. B, ref. 11): raises and lowers the side brush.
Brake (fig. B, ref. 12): parking brake
Suction LED (fig. C, ref. 9) indicates the suction status ON/OFF
6.3.

Fitting the side brush

This operation must be performed with the machine off and key removed
Proceed as follows (fig. D):
•
Lift the front of the machine
•
Fit the brush and fix it in place with the washer and screw provided (fig. D, ref. 1).
•
Unscrew the two screws (fig. E, ref. 1), adjust the height of the brush and tighten
the screws again.
IMPORTANT
ENGLISH
11