Using The Phone Line For Fax Only - HP Officejet 7612 Manual Del Usario

Fax
Set up fax
Connect the phone line

Using the phone line for fax only

Note: If a phone cord is provided with the printer,
HP recommends that you use this phone cord. If
the phone cord is not long enough, use a coupler
and another phone cord to extend.
1. Connect one end of the phone cord to the phone
wall jack.
2. Connect the other end to the port labeled 1-LINE on
the back of the printer.
Note: Do not insert into the port labeled 2-EXT.
3. If you have subscribed to a DSL/ADSL service,
connect a DSL/ADSL filter between the printer port
labeled 1-LINE and the phone wall jack.
How do I set up HP printers in digital phone
environments?
HP printers are designed specifically for use with
traditional analog phone services. If you are in
a digital phone environment (such as DSL/ADSL,
PBX, ISDN, or FoIP), you might need to use
digital-to-analog filters or converters when setting
up the printer for faxing.
Note: The printer might not be compatible
with all digital service lines or providers in all
digital environments or with all digital-to-analog
converters. Contact your phone company to
determine which setup options are best for you.
Note: If you are setting up ring pattern detection in
a PBX phone system that has different ring patterns
for internal and external calls, make sure you dial
the fax number of your printer using an external
number when recording the ring pattern.
1. Phone wall jack
2. Port labeled 1-LINE on the back of the printer
Note: Do not insert into the port labeled 2-EXT.
3. DSL/ADSL filter (provided by the telephone company
or service provider)
4