Descargar Imprimir esta página

Craftsman 917.28848 Manual Del Operador página 13

Publicidad

Idiomas disponibles

Idiomas disponibles

_kCAUTION:
Do not operate
the mower
without
either
the entire
grass
catcher,
on
mowers
so equipped,
or the deflector
shield
(S) in place.
REVERSE
OPERATION
SYSTEM
(ROS)
Your
tractor
is equipped
with
a Reverse
Operation
System
(ROS).
Any
attempt
by
the operator
to travel in the reverse
direction
with the attachment
clutch engaged
will shut
off the engine
unless
ignition
key is placed
in the ROS "ON" position.
_WARNING:
Backing
up with
the
at-
tachment
clutch
engaged
while
mowing
is
strongly
discouraged.
Turning the ROS "ON",
to allow
reverse
operation
with the attach-
ment clutch
engaged,
should
only be done
when the operator
decides
it is necessary
to
reposition
the machine
with the attachment
engaged.
Do not mow
in reverse
unless
absolutely
necessary.
[]
USING
THE
REVERSE
OPERATION
SYSTEM
-
Only use if you are certain no children
or other
bystanders
will enter
the mowing
area.
1.
Depress
brake
pedal all the way down.
2.
With
engine
running,
turn
ignition
key
counterclockwise
to ROS "ON" position.
3.
Look down
and behind
before
and while
backing.
4.
Slowly
depress
reverse
drive
pedal
to
start
movement.
5.
When use ofthe ROS is no longer needed,
turn the ignition
key clockwise
to engine
"ON" position.
ROS "ON" Position
Engine "ON' Position
(NormaI Operating)
TO OPERATE ON HILLS
_kWARNING:
Do not drive up or down
hills with slopes greater than 15 ° and do not
drive across any slope. Use the slope guide
provided at the back of this manual.
• Choosethe
slowest speed before starting
up or down hills.
• Avoid stopping or changing speed on hills.
• If stopping is absolutely
necessary, push
brake pedal quickly to brake position and
engage parking brake.
• To restart movement, slowly release park-
ing brake and brake pedal.
• Slowly depress appropriate drive pedal to
slowest setting.
• Make all turns slowly.
TO TRANSPORT
When
pushing
or towing your tractor,
be
sure to disengage
transmission
by placing
freewheel
control in freewheeling
position.
Freewheel
control
is located
at the rear
drawbar of tractor.
1. Raise attachment
lift lever to its highest
position.
2. Pull freewheel control out and intothe slot
and release so it is held in the disengaged
position.
• Do not push or tow tractor at more than
two (2) MPH.
• To re-engage transmission,
reverse above
procedure.
Transmission
Engaged
Trenamiesion Diaengaged
NOTE: To protect hood from damage when
transporting your tractor on a truck or a trailer,
be sure hood is closed and secured to tractor.
Use an appropriate means of tying hood to
tractor (rope, cord, etc.).
TOWING
CARTS
AND
OTHER
ATTACH-
MENTS
Tow only the attachments
that are recom-
mended by and comply with specifications
of the manufacturer
of your tractor.
Use
common sense when towing. Too heavy of
a load, while on a slope, is dangerous. Tires
can lose traction with the ground and cause
you to lose control of your tractor.
13

Publicidad

loading