Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING:
TO AVOID SERIOUS
INJURY, BEFORE PERFORMING
ANY
SERVICE OR ADJUSTMENTS:
1. Depress brake pedal fully and set parking brake.
2. Place attachment
clutch
in "DISENGAGED"
position.
3. Turn ignition key to "STOP" and remove key.
4. Make sure the blades and all moving parts have completely
stopped.
5. Disconnect
spark plug wire from spark plug and place wire where it cannot
come in contact with plug.
TO REMOVE
MOWER
1. Place
attachment
clutch
in "DISEN-
GAG ED" position.
2. Lower attachment
lift lever to its lowest
position.
3. Disengage belt tension rod (K) from lock
bracket (L).
CAUTION:
Belt tension
rod is spring
loaded. Have a tight grip on rod and release
slowly.
4. Remove mower belt from electric clutch
pulley (M).
5. Disconnect
front link (E) from mower
- remove retainer spring and washer.
6. Goto either side of mower and disconnect
mower suspension
arm (A) from chas-
sis and rear lift link (C) from rear mower
bracket (D) - remove retainer springs and
washers.
7. Go to otherside of mower and disconnect
the suspension
arm and rear lift link.
CAUTION: After rear lift links are discon-
nected, the attachment
lift lever will be spring
loaded. Have a tight grip on lift lever when
changing position of the lever.
8.
From
right
side
of mower,
disconnect
anti-sway
bar (S) from right rear mower
bracket
(D) - remove
retainer
spring
and
washer
and pull mower
toward
you until
the bar falls from the hole in bracket.
9.
Turn tractor
steering
wheel
to the left as
far as it will go.
1 0. Slide mower
out from under
right side of
tractor.
02989
21
Publicidad
