General Description - Victron energy BlueSolar MPPT 150/35 Manual De Instrucciones

1. General Description

1.1 Charge current up to 35 A and PV voltage up to 150 V
The BlueSolar MPPT 150/35 charge controller is able to charge
a lower nominal-v oltage battery f rom a higher nominal v oltage
PV array .
The controller will automatically adjust to a 12V, 24V or a 48V
nominal battery v oltage.
1.2 Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky , when light intensity is
changing continuously , an ultra f ast MPPT controller will
improv e energy harv est by up to 30% compared to PWM charge
controllers and by up to 10% compared to slower MPPT
controllers.
1.3 Advanced Maximum Power Point Detection in case of
partial shading conditions
If partial shading occurs, two or more maximum power points
may be present on the power-v oltage curv e.
Conv entional MPPT's tend to lock to a local MPP, which may
not be the optimum MPP.
The innov ativ e BlueSolar algorithm will alway s maximize energy
harv est by locking to the optimum MPP.
1.4 Outstanding conversion efficiency
No cooling f an. Maximum ef f iciency exceeds 98%. Full output
current up to 40°C (104°F).
1.5 Flexible charge algorithm
Eight preprogrammed algorithms, selectable with a rotary
switch.
1.6 Extensive electronic protection
Ov er-temperature protection and power derating when
temperature is high.
PV short circuit and PV rev erse polarity protection.
PV rev erse current protection.
1.7 Internal temperature sensor
Compensates absorption and f loat charge v oltages f or
temperature.
1