Rumbleseat Operation - UPPAbaby RumbleSeat Manual Del Usuario

RUMBLESEAT ASSEMBLY
ATTACHING RUMBLESEAT TO VISTA FRAME
To Attach Seat: Lower RumbleSeat onto adapters in forward or reverse
position and press down until it clicks into place. Pull up on seat to
ensure it is locked to frame.
Note: If you are having trouble attaching the seat onto the adapter, press recline button and seat attachment
will re-align into place.
ATTACHING/REMOVING THE BUMPER BAR
STEP 1: Insert metal posts into bumper bar
attachment slots found on both sides of seat.
NOTE: Bumper bar should not be used without the bumper bar cover.
CANOPY INSTALLATION
STEP 1: Pull canopy fabric over seat back recline
button.
8
To Remove Seat: Simultaneously
push down release buttons
and lift seat from frame
STEP 2: To remove, press button at bottom of plastic
housing and lift bumper bar out.
STEP 2: Snap each side of canopy attachment to
seat frame.
.
To Adjust Canopy: Slide canopy attachment
simultaneously up or down the seat frame for
desired height.

RUMBLESEAT OPERATION

ADJUSTING SEAT
To Recline Seat: Engage button on seat back and tilt
seat to desired position. Release button to lock in
one of four preset positions.
ADJUSTING CANOPY
To Use Sunshade: Pull sunshade out for SPF 50
sun protection.
To Use Peek-a-boo Window: Roll flap and secure
toggle button to elastic.
9