UPPAbaby RumbleSeat Manual Del Usuario página 7

RUMBLESEAT OPERATION
OPERATING THE SEAT HARNESS
To Lock the Harness: Slide belt ends into center lock
housing until it clicks together.
ADJUSTING SHOULDER HARNESS HEIGHT
STEP 1: Detach grey adjustment clip from harness
attachment loop.
NOTE: Use loop location above child's shoulder line, or closest to child's shoulder.
ADJUSTING THE HARNESS STRAP LENGTH
To Loosen Harness Strap: Pull up on ladder lock
and pull down on webbing .
10
To Unlock the Harness: Depress grey button at center
and pull apart.
STEP 2: Reattach clip to the desired harness loop.
To Tighten Harness Strap: Pull down on slip ring.
RUMBLESEAT OPERATION
REMOVING FABRICS FROM SEAT
STEP 1: Unfasten elastic loops from lower footrest.
STEP 3: Unsnap nylon webbing from frame. Repeat
on other side.
NOTE: Reverse steps when replacing seat fabric.
STEP 2: Unzip retainer pocket located on underside
of seat.
STEP 4: Unsnap fabric from seat frame. Repeat on
other side.
STEP 5: Remove seat fabric from seat frame.
11