Master Lock NightWatch DEADBOLTS Guia Del Usuario página 8

Deleting a Code
Press the "Program" button until the keypad on the exterior of the
door begins to flash blue. When it flashes blue you can release the
button.
Enter your personal administrative code...
Push the
3-4
press .
Enter
Type in the 4-10 digit code you want to delete and again press
Re-enter the code and again press
• If the keypad lights in green the code was deleted.
• If it lights red the code wasn't deleted and you'll need to repeat the
steps again.
• If the keypad flashes red, the code was not found in the memory
and is not an active code.
Changing the Administrative Code
Press the "Program" button until the keypad on the exterior of the
door begins to flash blue. When it flashes blue you can release the
button.
Enter your personal administrative code...
Push the 5-6
administrative code) and press
Type in your new 6-digit administrative code and press
Re-enter your new 6-digit administrative code and again press
• If the keypad lights in green your new administrative code has been
confirmed and added.
• If it lights red the code wasn't confirmed and you'll need to repeat
the steps again.
button (the function button for deleting a code) and
button (the function button for changing your
.
Enter
.
Enter
8
.
Enter
Enter .
Enter .