Genicom 5000 Serie Guía De Referencia Rápida página 24

5000 Series Quick Reference Guide
5. Lift the old ribbon cartridge off the ribbon deck.
6. Make sure the orange SLIDE LEVER on the new ribbon cartridge is in
the full left position.
7. Turn the yellow SPOOL knob clockwise to take out any slack in the
ribbon fabric between the cartridge arms.
8. Place the printer offline and raise the top cover.
9. Turn the print gap wheel to the LOAD
Step 3.]
10. Turn the white ribbon-locking lever clockwise to the LOAD position.
[See the illustration in Step 4.]
Ribbon Cartridge
position.
23
Ribbon Deck
[See illustration in
GEK-99012D