DISPLAY EXPLANATIONS
Date/Time Indicator
Systolic
Pressure
Diastolic
Pressure
Heart Rate
9
Display Symbols:
Pulse Symbol: Shows the heart rate per minute.
Weak Battery Symbol: Appears when batteries should be replaced.
Error Symbol: Appears when an error has occurred.
Risk Category Index: See page 21 for more information.
Irregular Heartbeat Detector: See page 22 for more information.
User 1: Appears when the monitor is operated by User 1.
User 2: Appears when the monitor is operated by User 2.
Memory Review Symbol: Indicates the user is in Memory Recall
MEMORY REVIEW
Mode.
Memory Average Symbol: Display average of last 3 readings.
LAST 3 AVG.
Data Transmission Indicator: Indicates when information is being
transmitted from your monitor to your mobile device App.
If
and any of the following letters and numbers appear in the area
that diastolic pressure should be displayed or the Data transmission
indicator appears, an error has occured with your reading. See the
Troubleshooting section of this manual for more information.
Cuff Not Fastened Securely: Refasten the cuff and measure again.
Cuff Fastened Too Tight: Refasten the cuff and measure again.
Pressure Exceeding 300mmHg: Switch the unit off to clear.
Then measure again.
System Error: Measure again.
Error Determining Measurement: Switch the unit off to clear, and
measure again. Keep wrist steady during measurement.
Measurement Error: Measure again.
Data Transmission Error: Make sure the mobile device and the
blood pressure monitor are paired and are within 6-9 feet of each
other. Try sending the data again.
10