Display Explanations - HoMedics Walgreens 518728 Manual De Instrucciones

DISPLAY EXPLANATIONS

Date/Time Indicator
Systolic
Pressure
Diastolic
Pressure
Pulse Rate
11
Display Symbols:
User 1: Appears when the monitor is operated
by User 1.
User 2: Appears when the monitor is
operated by User 2.
Weak Battery Symbol: Appears when batteries
should be replaced.
Pulse Symbol: Shows the pulse rate per minute.
Memory Average: Displays average of last
3 readings
Risk Category Indicator: Compares readings
against blood pressure guidelines. See page 22
for more information.
(No Symbol)
If and any of the following letters and numbers
START
MEM
STOP
appear in the area that systolic pressure should be
displayed, an error has occurred with your reading.
See Troubleshooting section of this manual for more
information.
Measurement Error: Measure again. Wrap
the cuff correctly and keep wrist steady
during measurement.
Air Circuit Abnormality: Measure again.
Pressure Exceeding 300 mmHg: Switch the unit
off to clear, then measure again.
Error Determining Measurement Data: Measure
again.
Recalibration Alert: Recalibration recommended.
See page 27 for information.
12