Victron energy PPP-8 Manual Del Usuario página 10

5. Operation
Push button:
• Press shortly:
The high power output will be on during 30 min., LED lights red.
The domestic output will be on permanently (domestic output
not available on 8 Ah model).
• Press during 2s:
Both the high power output and the domestic output will be
permanently on. The red LED blinks slowly.
• Press during 5s:
The PPP will switch off (= storage mode), LED blue, flashes 10
times.
Both the high power output and the domestic output will be off.
The adapter or car/solar input can still be used to charge the
PPP.
LED status indication:
 = On
 = Slow flash (2 seconds on, 2 seconds off)
 = Quick flash (½ second on, ½ second off)
Peak Power Pack Off
High Power output ON
High Power output permanently
ON
Mover overload/short circuit/over
temperature
Charge Car/Solar.
Peak Power Pack fully charged.
Storage mode
Operation of the mains charger is indicated by the green LED on
the charger.
8
Red LED Blue LED



 (during 10s)

