equipment maintenance and cleaning
As the cutter blades are very sharp and the engine is particularly powerful, you should take the appropriate
precautions when using the equipment on a daily basis to ensure that any items of clothing, ties, scarves and hair do
not fall into the equipment!
The collection unit must be regularly checked and emptied if possible to ensure it is able to operate smoothly.
Do not allow any items of clothing, plastic, or metal fragments to fall into the cutter.
It is advised to use a number of sheets of paper below the technical capacity in order to achieve a long life
expectancy.
You must disconnect the plug first when cleaning the equipment. It must then be cleaned on the outside by using a
cloth and mild soap solution. The cloth should only be damp and not wet. Avoid any liquids from penetrating into the
cutter. Do not use bleach, alcohol, paint stripper, or any other flammable liquids under any circumstances.
packaging contents
Item
Quantity
waste disposal
Directive 2002/96/EC applies for the treatment, collection, recycling, and disposal of electrical and
electronic equipment and components (waste electrical and electronic equipment – WEEE).
The symbol displaying a rubbish bin with a cross specifies that the equipment must not be disposed
of alongside any household waste, but must be recycled correctly by using special equipment or via
collection centres. Any disposal must be approved.
directives
This equipment complies with the requirements specified in EU directive 2004/108/EC "Electromagnetic
Compatibility" and 2006/95/EC "Low Voltage Directive".
This equipment complies with the requirements specified in America and Canada directive UL
60950-1, 2nd Edition, 2011-12-19 (Information Technology Equipment -Safety -Part 1:
US LISTED
General Requirements) CSA C22.2 No. 60950-1-07, 2nd Edition, 2011-12 (Information
I.T.E
34US
Technology Equipment -Safety -Part 1: General Requirements)
E303600
Paper shredder
1
Power cable
1 US
6
User manual
1