PRODIGY Pocket® Blood Glucose Meter
Battery Replacement
When replacing the battery, make sure the meter
is turned off.
STEP 1: With the meter off, press the buckle on
the battery cover and lift up to open the cover.
STEP 2: Remove the old battery and replace with
new one. Be sure to align the battery properly.
STEP 3: Close the battery cover. If the meter does
not power on after you have replaced the battery,
check that the battery is correctly installed.
STEP 4: Turn the meter on by pressing the "M"
button to check the time and date. Replacing
the battery does not affect the meter's memory
(previous test results stored in the memory).
However, the date, time and unit of measurement
settings may need to be updated.
Caution: As with all small objects, the battery
should be kept away from small children. If the
battery is swallowed, seek medical assistance
immediately.
Owner's Manual
PRODIGY Pocket® Blood Glucose Meter
System Troubleshooting
Special Messages
Special messages and error messages help to
identify certain problems but do not appear in all
cases when a problem has occurred. Improper
use may cause an inaccurate result without
producing an error message.
In the event of a problem, refer to the information
under "Action" in the "Error Messages" section.
If you continue to have a problem, please refer
to the "Troubleshooting Guide" section. If you
follow the actions recommended but the problem
is not resolved, please contact Customer Care at
1.800.243.2636 for assistance.
Message
52
What it means
"Lo" appears when your result is
below the measurement limit, which is
less than 20 mg/dL (1.1 mmol/L). "Lo"
indicates hypoglycemia (low blood
glucose). You should immediately
consult your healthcare professional.
Owner's Manual
53