Publicidad
Manual del Router Zyxel Prestige 643, en Castellano: Capitulo 10
SdcmdSyslogSend( SYSLOG_CDR, SYSLOG_INFO, String );
String = board xx line xx channel xx, call xx, str
board = the hardware board ID
line = the WAN ID in a board
Channel = channel ID within the WAN
call = the call reference number which starts from 1 and increments by 1 for each new call
str = C01 Outgoing Call dev xx ch xx (dev:device No. ch:channel No.)
Jul 19 11:19:27 192.168.102.2 Zyxel Communications Corp.: board 0 line 0 channel 0, call 1, C01 Outgoing Call
dev=2 ch=0 40002
Jul 19 11:19:32 192.168.102.2 Zyxel Communications Corp.: board 0 line 0 channel 0, call 1, C02 OutCall
Connected 64000 40002
Jul 19 11:20:06 192.168.102.2 Zyxel Communications Corp.: board 0 line 0 channel 0, call 1, C02 Call Terminated
2. Packet triggered
Packet triggered Message Format
SdcmdSyslogSend( SYSLOG_PKTTRI, SYSLOG_NOTICE, String );
Jul 19 11:28:39 192.168.102.2 Zyxel Communications Corp.: Packet Trigger: Protocol = 1, Data =
4500003c100100001f010004c0a86614ca849a7b08004a5c0
20001006162636465666768696a6b6c6d6e6f7071727374
Jul 19 11:28:56 192.168.102.2 Zyxel Communications Corp.: Packet Trigger: Protocol = 1, Data =
4500002c1b0140001f06b50ec0a86614ca849a7b042700170 0195b3e00000000600220008cd40000020405b4
Jul 19 11:29:06 192.168.102.2 Zyxel Communications Corp.: Packet Trigger: Protocol = 1, Data =
45000028240140001f06ac12c0a86614ca849a7b042700170 0195b451d1430135004000077600000
3. Filter log
Filter log Message Format
SdcmdSyslogSend(SYSLOG_FILLOG, SYSLOG_NOTICE, String );
String = IP[Src=xx.xx.xx.xx Dst=xx.xx.xx.xx prot spo=xxxx dpo=xxxx] S04>R01mD
IP[...] is the packet header and S04>R01mD means filter set 4 (S) and rule 1 (R), match (m) drop (D).
Src: Source Address
Dst: Destination Address
prot: Protocol ("TCP","UDP","ICMP")
Spo: Source port
Dpo: Destination port
file:///C|/Temp/manual_Zyxel643_html/manual%20zyxel%20prestige%20643/html/10.htm (7 of 20) [25/04/2003 12:15:22]
L02 Tunnel Connected(L2TP)
C02 OutCall Connected xxxx (means connected speed) xxxxx (means Remote Call Number)
L02 Call Terminated
C02 Call Terminated
String = Packet trigger: Protocol=xx Data=xxxxxxxxxx.....x
Protocol: (1:IP 2:IPX 3:IPXHC 4:BPDU 5:ATALK 6:IPNG)
Data: We will send forty-eight Hex characters to the server
Publicidad
