EWT CS 2 Instrucciones De Uso página 40

4. Clear all dirt or debris from the container and hose (Fig. 4).
5. Clean the foam filter or dust filter by washing it with a mild soapy solution (Fig. 5).
6. Check the hoses, clasps, and power cable to verify that they have not been damaged. (Fig. 6)
7. Check the float switch after removing the foam filter. To do this, take the upper part by the handle
and turn it over carefully so that the filter housing is turned upwards. The float switch should be able
to move freely up and down.
IMPORTANT! Clean or change the cloth filter regularly for best
performance. ALWAYS USE CLOTH FILTER FOR DRY
VACUUMING. If the machine is used without the cloth filter, the
motor will burn out and the warranty will be voided. Always keep
spare filters on-hand.
NOTICE! The filters included are made of high quality materials
designed to stop small dust particles. The cloth filter should be used
for dry pick-up only. A dry cloth filter is necessary to pick up dust. If
the cloth filter is wet, it will clog quickly and be very difficult to clean.
Handle the filter carefully when removing it for cleaning and replac-
ing it. Check the filters for tears or small holes, a small hole can let
dust pass through and out of the cleaner. Do not use a filter with
holes or tears, replace it immediately.
WARNING! ALWAYS DISCONNECT THE PLUG FROM THE
POWER OUTLET BEFORE REMOVING THE POWER HEAD
FROM CONTAINER.
40