General MMD4E Manual Del Usuario página 5

5. Carefully press the test pins into the material whose
moisture level you wish to measure. The level will be
displayed as a percentage. The following tables show the
display indications for all possible moisture level readings
in Wood and Building Materials Measurement modes.
Wood Measurement Mode Reference Table
Moisture Level
<5%
5% to 11.9%
12% to 15.9%
16% to 50%
>50%
Building Materials Measurement Mode Reference Table
Moisture Level
<1.5%
1.5% to 16.9%
17% to 19.9%
20% to 33%
>33%
To hold any reading ("freeze" the display), briefly press (but
do not hold) the HOLD button. To release the hold, briefly
press the HOLD button again. This feature allows you to make
a measurement in a dark place or around a corner, hold the
reading, and display it within 3 minutes later where the
lighting is better. Measurements can be held for no more than
3 minutes—the duration of the meter's Auto Power Off
trigger.
Display Indication(s)
_ _ . _%
XX.X% + blue LOW LED
XX.X% + green MID LED
XX.X% + red HIGH LED + beeper
_ _ _
. % + red HIGH LED + beeper
Display Indication(s)
_ _ . _%
XX.X% + blue LOW LED
XX.X% + green MID LED
XX.X% + red HIGH LED + beeper
_ _ _
. % + red HIGH LED + beeper
5