Technical Data - Osram DALIeco LS/PD LI Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

3 Operation, settings
Use of the sensor and confi guration in the system
3.1 Setting the detection range for presence detection
In order to use the presence detection in a targeted way, the detection range of the sensor can/
must be set independently of the spatial conditions
1.
Remove/insert or rotate one or both shutters where necessary.
2.
By changing the shutter position, you can infl uence the detection range of the sensor direc-
tionally in order to prevent undesired presence detection.
3.
For a quick test of the effectiveness of the settings, use the test function of the remote
control used
separate manual for the control unit used.
3.2 Sensor button
3a
This button (2) executes different functions depending on the duration of activation.
1.
Press the sensor button (SP) in order to switch the IR reception of the remote controls on
(sensor LED fl ashes red for 3 seconds) or off (sensor LED illuminated red for 3 seconds)
2.
Press the sensor button (VLP) in order to start Auto Setup and thereby calibration.
After a 3-minute calibration, the light fl ashes and the automatic lighting control is started.
Functional description of Auto Setup
separate manual for the control unit used.
separate manual for the control unit used.
7
.

4 Technical data

Cable connection
4p4c, max. total cable length 25 m
Ambient temperature
-20 °C to +50 °C (operation)
Max. cable length, sensor
25 m, ensure contact assignment 1:1
for extension/shortening
Working range, light sensor
20 - 800 lux (directly on the sensor)
Protection class
IP20
CE conformity
EMC acc. to EN 61547; low voltage acc. to EN 60928
Installation height
max. 5.0 m
Detection range
max. Ø 7.0 m
Detection angle
40° - 90°
Detection range adjustable via shutter
Installation height
2.0 m
Detection range
Installation height
2.5 m
Detection range
Installation height
3.0 m
Detection range
Installation height
3.5 m
Detection range
Max. installation height 5.0 m
Max. detection range
(min. 40° - max. 90°)
Ø 1.5 m - 4.0 m
Ø 1.8 m - 5.0 m
Ø 2.0 m - 6.0 m
Ø 2.5 m - 7.0 m
Ø 7.0 m
9

Publicidad

Tabla de contenido
loading

Tabla de contenido