Connecting The Drive To Your Computer - Toshiba CANVIO BASICS Manual De Instrucciones

Connecting the drive to your computer

2
1

USB 3.0 Micro-B connector

Power/Data indicator light
1. With your computer powered on and fully booted up, plug the USB 3.0 Standard-A connector into a USB port of
your host system, or an active USB HUB.
You may need USB 3.0 Express Card Host Controller for your computer if the computer doesn't have
NOTE
USB 3.0 port. You also can connect the device to USB 2.0 port of your computer, However the transfer
rate will be downgraded to that of USB 2.0.
2. Now, plug the USB 3.0 micro-B connector into the corresponding port of the drive itself.
< Windows PC >
Immediately,

the Power/Data indicator light will illuminate

the drive will power up

the drive should mount and a new drive icon should appear in "My Computer"
< Mac >
Immediately,

the Power/Data indicator light will illuminate

the drive will power up and is ready to use
User's Manual - CANVIO BASICS
3 4

USB 3.0 Standard-A connector

USB 3.0 host
backward compatible to USB 2.0
EN_4