Safety Instructions; Packing Content - oneConcept 10029373 Manual Del Usuario

Dear Customer,
Congratulations on purchasing this equipment. Please read this manual carefully and take
care of the following hints to avoid damages. Any failure caused by ignoring the mentioned
items and cautions mentioned in the instruction manual are not covered by our warranty
and any liability.
WARNING
Risk of injury! Any metal object may attract a lightning strike, including your
weather station mounting pole. Never install the weather station in a storm.
Installing your weather station in a high location may result in injury or death.
Perform as much of the initial check out and operation.
Quck Start Guide and Contents
Although the manual is comprehensive, much of the information contained may be intui-
tive. In addition, the manual may not fl ow properly because the sections are organized by
components.
The following Quick Start Guide provides only the necessary steps to install, operate the
weather station, along with references to the pertinent sections.
Step Description
1 Assemble and power up the sensors.
2 Power up the display console and synchronize with wind sensor, rain sensor and
thermo-hygrometer sensor.
3 Mount the sensor array.
4 Set date and time on console.
• 1x Display Console
• 1x Thermo-hygrometer / Rain Gauge / Wind Vane / Wind Speed Sensor
• 1x Sensor mounting bracket / foot-mounting / fi xed mount
• 2x Pole mounting U-bolt / nuts (M5)
• 4x Pole mounting nuts (M5) / bolts (Ø 5)
• 2x Pole mounting nuts (M3) / bolts (Ø 3)
• 4x Tapping screw
• 1x Manual
• 1x Adaptor

Safety Instructions

Packing Content

Page
31
35
37
42
29