oneConcept 10029373 Manual Del Usuario página 46

Change Backlight Color (USE)
Press the SET key again to manually select the backlight color (the COLOR icon will be
displayed). Press [+] key or [-] key to choose among 11 different colors.
• Backlight Contrast: Press the SET key again to change the backlight brightness (the
BRIGHT icon will be displayed). Press the [+] key or [-] key to adjust the backlight con-
trast from 1 (dim) to 8 (bright).
• Factory Settings: Press the HISTORY/- key and install the battery simultaneously, the
RESET will display and restore to factory default settings.
Chanel Selection
Press the CHANNEL/+ button to switch the display between remote thermo-hygrometer
sensors 1 through 8, and scroll mode . In scroll mode, all of the indoor and detected out-
door thermo-hygrometer sensors will be displayed in five second intervals.
Sensor Search Mode
If any of the sensor communication is lost, dashes (--.-) will be displayed on the screen. To
reacquire the signal: Press and hold the CH/+ button for 3 seconds to enter sensor search
mode, press [+] key or [-] key to toggle between CH(1 to 8), WIND, RAIN, ALL and NOT.
• If a specific channel is lost, press the CH/+ button to display this channel, in search mode
to select CH(1-8) and press SET or Alarm key to exit, the search icon
constantly for 3 minutes. Once the signal is reacquired, the remote search icon will turn
off, and the current values will be displayed.
• If wind or rain sensor channels are lost, in search mode to select WIND or RAIN and press
SET or Alarm key to exit, and the remote search icon
up to 3 minutes. Once the signal is reacquired, the remote search icon will turn off, and
the current values will be displayed.
• If new sensors are added, subtracted, or multiple sensor channels are lost, in search
mode to select ALL and press SET or Alarm key to exit, and the remote search icon
will be constantly displayed for up to 10 minutes. Once the signal is reacquired, the re-
mote search icon will turn off, and the current values will be displayed.
• Select NOT and press SET or Alarm key to exit, then return to normal mode.
46
will be displayed
will be constantly displayed for