aDVancED mEnu controlS
DV55/DV56 Bilevel Patient
Menu Layout
The following chart shows by Mode each Display you
will scroll through using the Next or Previous buttons
on the keypad. Pressing the Down key at the Enable
Menu Display will allow you to enter this submenu -
then use Next or Previous buttons to scroll through it;
press the Up button to return to main menu. Once
the final Display is reached, pressing the Next button
will return you to the first Display.
MENU - CPAP Mode
P:10.0
CPAP
Heat:5
–
P : 1 0 . 0 S
T R R : 1 5
I / E : 1 : 1 . 0 ( 5 0 % )
–
L K : 1 2 3 S
S E V : A S
M V : 1 2 3 . 4 V T: 1 2 3 4
Set Pressure
10.0 cmH2O
Delay Time
10 minutes
Delay Pressure
5.0 cmH2O
Tubing Length
1.8 m (6 ft)
Enable Menu
Press
LCD Contrast Adj
50%
Compliance Meter
123456.7 hours
Hourmeter
123456.7 hours
Firmware Version
V0.11 21/08/2009
Serial Number
KD123456
Adherence Score
83% (25/30)
SmartCode 1-Day
G201-0Y7-6GPH
Auto-OFF
Enabled
Auto-ON
Enabled
Mask Fit Check
Enabled
Low Backlight
Enabled
Exit Menu
Press
NOTe: There are 5 levels of
SmartCode. Use up or down
key to change between levels.
MENU - Bilevel Mode
P:10.0
ST
NOTe: Mode can read S,
T or ST
Heat:Off
–
P : 1 0 . 0 S
T R R : 1 5
I / E : 1 : 1 . 0 ( 5 0 % )
–
L K : 1 2 3 S
S E V : A S
M V : 1 2 3 . 4 V T: 1 2 3 4
IPAP
10.0 cmH2O r 5.0
EPAP
5.0 cmH2O r 5.0
Delay Time
45 minutes
Delay Pressure
5.0 cmH2O
IPAP Rounding
0 (1234 ms)
EPAP Rounding
0 (1234 ms)
Insp. Trigger
Bilevel S & ST Modes Only
5
Exp. Trigger
Bilevel S & ST Modes Only
5
Backup Rate
Bilevel ST & T Modes Only
15 BPM
I/E Ratio
Bilevel ST & T Modes Only
1 : 1.0 (50%)
Tubing Length
3.0 m (10 ft)
Enable Menu
Press
LCD Contrast Adj
50%
Compliance Meter
123456.7 hours
Hourmeter
123456.7 hours
Firmware Version
V0.11 21/08/2009
Serial Number
KD123456
Adherence Score
70% (21/30)
SmartCode 1-Day
FZA4-99D-D6WH
SE-DV56
EN
Auto-OFF
Enabled
Auto-ON
Enabled
Mask Fit Check
Enabled
Low Backlight
Enabled
Exit Menu
Press
17