Advanced Menu Controls; Advanced Menu List - DeVilbiss Healthcare SleepCube Bilevel ST CPAP DV55 Serie Guía De Instrucciones

Dispositivo de presión positiva en las vías respiratorias
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

aDVancED mEnu controlS

aDVanCeD menU ConTRols
With the device on, press the "Next" or "Previous" buttons on the keypad to scroll through
the items on the display. Not all of the features in the table below are available in all models;
some are optional and some depend on what your physician and/or home care provider has
selected. The table shows the items you may see, and describes the feature associated with
each item. Also, some features are only available in Bilevel Mode or with the DeVilbiss
SmartLink™ Therapy Management Module – these are noted in the 'Mode' column below. If
you do not see some of these options, your model or configuration does not support them.
Name
PREVIOUS ITEM
NEXT ITEM
SETTING CHANGE
Please note that the values displayed are examples only.

Advanced Menu List

Display Example
P: 5.0
Heat:Off
Set Pressure
10.0 cmH2O
P : 1 0 . 0 S
T R R : 1 5
I / E : 1 : 1 . 0 ( 5 0 % )
L K : 1 2 3 S
S E V : A S
M V : 1 2 3 . 4 V T: 1 2 3 4
Symbol
Function
Pressing this button displays the previous menu option.
Pressing this button displays the next menu option.
These buttons allow you to adjust the setting that is
shown on the display.
Mode
Description
This is the default screen when the SleepCube is
ST
turned on. The actual mask pressure and heater
setting are shown. The displayed pressure may
All
vary slightly while breathing. If the heater system is
not connected, the heat setting will be blank.
This is a prescription setting which controls the
CPAP
operating pressure.
Mode
Real time info screen, top row shows measured
pressure (P), Trigger source (Spontaneous or
All
Timed), breath state (dash in center of top row
Bilevel
goes high during inhale and low during exhale).
Modes
Bottom row shows I:E ratio and % inhale.
Real time info screen, top row shows Leak rate
(LK), Trigger source (Spontaneous or Timed),
All
breath state (dash in center of top row goes high
Bilevel
during inhale and low during exhale), Event
Modes
Markers (EV), Bottom row shows Minute Volume
(MV) and Tidal Volume (VT)
EN
SE-DV56
13

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido