Adjusting Sweep Hose Power - Hayward VIPER 5500 Guia Del Usuario

Adjusting Sweep Hose Power

• In most pools it will not be necessary to adjust the
Sweep Hose power.
• Observe the Viper cleaner operating in the pool. The
Sweep Hose should move in a slow, undulating
(snake-like) motion.
• Sweep Hose Not Moving: if the sweep hose does not
move side-to-side and just drags behind the cleaner, check
the Sweep Hose for holes. Check for debris behind the
adjustment screw or in the jet-end of the Sweep Hose.
• Sweep Hose Moves Slowly Or Not At All: turn the
adjustment knob counter-clockwise to increase
Sweep Hose power.
• Sweep Hose Frequently Sprays Out Of The Pool: turn
the Sweep Hose adjustment knob clockwise to
reduce Sweep Hose power.
Adjusting Sweep Hose Power
Adjustment Knob
Use Only Genuine Hayward Replacement Parts.
Sweep Hose
13