Zhermack SAB 1000 Manual De Uso Y Mantenimiento página 96

6.3.1 Worktops
The SAB 1000 aspirator has been designed to be
placed directly on the floor.
CONNECTING UP TO THE POWER SUPPLY
6.4
The user must provide a power connection with relative socket near the equipment installation point.
The user must also install an adequate electrical circuit breaker upstream from the socket as well as
efficacious overload/indirect contact safety devices.
Connection is effected via the safety plug (16A, in compliance with European standards) at the end of
the power lead: this must be inserted in the mains socket.
When connecting check:
• that mains voltage and frequency are as indicated on the identification plate (incorrect power
supply voltage may damage the equipment).
• that the mains supply has a proper, efficient earth connection.
It is forbidden to tamper with the power lead and its plug. When replacing them
owing to damage and/or wear please contact an Authorised Service Centre.
A proper earth connection is compulsory. Should it temporarily be necessary
to use an extension lead the latter must comply with the standards in force
in the country of use.
96 of 136
MAINTENANCE AND USE MANUAL
EN
SAB 1000