Operations
01 Network Connection
You can control and monitor your wine cellar through the SmartThings app. For more
information, see the SmartThings section.
NOTE
• Recommended encryption systems include WPA/TKIP and WPA2/AES. Any newer or
unstandardized Wi-Fi authentication protocols are not supported.
• Wireless networks may be affected by the surrounding wireless communication
environment.
• If your Internet service provider has registered the MAC address of your PC or modem
for identification, your Dacor wine cellar may fail to connect to the Internet. If this
happens, contact your Internet service provider for technical assistance.
• The firewall settings of your network system may prevent your Dacor wine cellar from
accessing the Internet. Contact your Internet service provider for technical assistance. If
this symptom continues, contact a local Dacor service center or retailer.
• To configure the wireless access point (AP) settings, see the user manual of the AP.
• Dacor wine cellars support both Wi-Fi 2.4 GHz with IEEE 802.11 b/g/n and Soft-AP
protocols (IEEE 802.11 n is recommended).
• Unauthorized Wi-Fi wireless routers may fail to connect to applicable Dacor wine
cellars.
• Recommended to have Wi-Fi Router or Access Point with in 50 feet of appliance.
02 Cab net L ght
Press to adjust the cabinet light. You can choose from 4 different levels (Off, 1-3).
NOTE
The cabinet light is set to level 3 (brightest) as factory default.
03 Presenter L ght
Presenter Light
04 Upper Zone Select
Upper Zone Select
20
English
Press to adjust the presenter light. You can choose from 4 different
levels (Off, 1-3).
NOTE
The presenter light is set to off as factory default.
Press this button, and then use the Temp. Control buttons to adjust
the upper zone temperature between 40 °F ~ 65 °F (4 °C ~ 18 °C).