Cramer 82HD Manual De Instrucciones página 2

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
SPECIFICATIONS
82HD
Voltage
No load speed
Blade speed
Blade length
Cutting capacity
Measured sound pressure
level
Guaranteed sound power
level
Vibration level
Battery
Battery charger
Weight (without battery)
DESCRIPTION
See figure 1.
1. Blade cover
2. Blade
3. Guard
4. Front handle
5. Micro switch
6. Trigger Switch
7. Rotate release
8. Rear handle
9. Battery
10. Battery release button
11. On/off power button
12. Anti-jamming button
ASSEMBLY
UNPACKING
„ This product requires no assembly.
„ Carefully remove the product and any accessories
from the box. Make sure that all items listed in the
packing list are included.
„ Inspect the product carefully to make sure no
breakage or damage occurred during shipping.
„ Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
English (Original instructions)
82V
-1
4000 (±10%) min
-1
4000 (±10%) min
66 cm
33 mm
83 dB (A), k=3.0
96 dB (A)
<2.5 m/s², k=1.5 m/s²
82V220G/82V430G
82V220/82V430
82C1G/82C2/82C6
4.2 kg
PACKING LIST
„ Hedge trimmer
„ Operator's manual
OPERATION
For complete charging instructions, refer to the
Operator's Manuals for your battery pack and charger
models.
INSTALL BATTERY PACK
See figure 2.
„ Place the battery pack in the hedge trimmer. Align
groove in battery pack with raised rib on hedge
trimmer.
„ Make sure the latch on the hedge trimmer snaps
in place and that battery pack is secured in hedge
trimmer before beginning operation.
REMOVE BATTERY PACK
See figure 2.
„ Locate the latch on the hedge trimmer and depress
to release the battery pack from the hedge trimmer.
„ Remove battery pack from the hedge trimmer.
When placing battery pack in your hedge trimmer,
be sure groove in battery pack aligns with raised rib
on hedge trimmer and latch snaps in place properly.
Improper assembly of battery pack can cause
damage to internal components.
STARTING THE HEDGE TRIMMER
See figure 3.
„ Remove the blade cover.
„ Install the battery pack.
„ Press the power button (I/O) (11) to turn the unit on.
„ For added safety, there is a micro switch (5) in the
front handle. When operating, hold the trimmer with
both hands, one hand to squeeze the micro switch,
and the other hand to squeeze the trigger switch
(6).
STOPPING THE HEDGE TRIMMER
See figure 3.
„ Release the micro switch (5) and trigger switch (6)
to stop the hedge trimmer.
„ Press the power button (11) to turn off the hedge
trimmer.
„ Remove battery pack from the hedge trimmer.
1
CAUTION