Tabla de contenido
Publicidad
US
Installation Instructions
5. Press the right knob again when the screen asks for language confir-
mation. After this confirmation, should a change in language selec-
tion become necessary, follow the directions in the user's manual.
Warning Confirmation (Disclaimer)
Confirming the receipt of this warning message indicates that you have
read and understood the user's manual and that you are aware of the
dangers associated with the use of this navigation equipment.
You must press the right knob to confirm receipt of this message before
continuing with the installation procedure.
System Calibration
After the GPS initialization is complete, a calibration ride is required.
•
Wait for the CALIBRATION screen to be displayed following the
installation of the navigation software. If the CALIBRATION screen
doesn't appear, the unit is already calibrated. In this case, erase the
calibration as described in SERVICE MODE/CALIBRATION/
DELETE.
•
If the unit is switched off during calibration, the system will request
language selection again when switched back on.
•
A navigation CD is not absolutely necessary during calibration.
However, without the CD the location will not be displayed. It is possi-
ble to insert an audio CD or to listen to the radio during calibration.
Press the NAV button to switch back to the calibration menu.
•
The calibration ride can be performed in a non-digitized area.
•
During the calibration ride, the speed signal (GAL) will adapt to the
vehicle-specific data and the gyro sensor will adapt to the installation
position of the unit.
•
The CALIBRATION screen may show CALIBRATION RIDE NOT
POSSIBLE if the GPS FIX is not 3-D. Move the vehicle to a less
obstructed area for better reception.
•
After a GPS 3-D FIX is available, the CALIBRATION screen will
switch to CALIBRATION RIDE CAN START.
•
Drive the vehicle 200 - 300 yards in a straight line. Then turn right or
left, 60° or more, and drive for another 200 - 300 yards in a straight
line. Again turn and drive, until the main navigation system menu
appears on the display.
The quality of calibration will not be affected if the vehicle is not driven
exactly as stated above. However, the calibration process will take
longer.
Subject to correction and technical modifications
2L2Z-18814-NAV
52/71
SK2L2J-10E945-AA
©
Copyright Ford 2002
Publicidad
Tabla de contenido
