Remote Start - LG LUTD4919SN Manual Del Propietário

Setting the Meat Probe Function (example for
Roast 375 °F with probe temp. 160 °F)
1
Select cook mode. Turn the oven mode knob to
select Conv. Roast.
2
Set the oven temperature: press plus(+) or
minus(-) until 375
°F
3
Press Start.
4
Set the probe temperature: press plus(+) or
minus(-) until 160
°F
5
Press Start.
The default probe temperature is 150 °F (65 °C), but
can be changed to any temperature between
80 °F (27 °C) and 210 °F (100 °C). The display
shows the changing probe temperature. When the
set probe temperature is reached, the oven shuts off
automatically.
Changing the Probe Temperature while Cooking
1
Press Temp.
2
Set the oven temperature and probe
temperature.
3
Press Start.
IMPORTANT NOTE
Press Clear/Off to cancel the Meat Probe function
at any time. To avoid breaking the probe, make sure
food is completely defrosted before inserting.
CAUTION
• Always use an oven mitt to remove the
temperature probe. Do not touch the broil
element. Failure to obey this caution can result
in severe personal injury.
• To avoid damage to the meat probe, Do
not use tongs to pull on the probe when
removing it.
• Do not store the meat probe in the oven.
appears in the display.
appears in the display.
Recommended Probe Temperature Chart
Doneness
Beef, Lamb and Veal
Rare
Medium Rare
Medium
Well Done
Pork
Well Done
Poultry
Breast, Well Done
Thigh, Well Done
Stuffing, Well Done

Remote Start

If the appliance is registered on a home Wi-Fi
network, this function starts or stops the pre-heating
function of the appliance. Follow the instructions on
page 42 to register the appliance on the network.
Set the oven mode knob to the Remote Start position
to use the function.
Setting Remote Start
1
Open the oven door to make sure the oven is
empty and ready for pre-heating. Do not place
food in the oven. Close the oven door.
2
Within 30 seconds of closing the door, turn the
oven mode knob to select Remote Start.
3
When ON appears in the display, the Remote
Start function is ready to use.
4
Follow the directions in the smart phone app to
set Remote Start times.
NOTE
Remote Start is disconnected in the following
situations:
• Remote Start is never set up in the smart phone
app.
• The Remote Start status is "ready."
• Remote Start experiences a problem during
operation.
41
OPERATION
Probe Temp.
130 °F (54 °C)
140 °F (60 °C)
150 °F (66 °C)
160 °F (71 °C)
170 °F (77 °C)
170 °F (77 °C)
180 °F (82 °C)
165 °F (74 °C)