Swann SWWHD-FLOCAM Guia De Inicio Rapido página 8

4 Connect individual supply wires from the junction box to the floodlight unit using the
provided wire nuts. Pair the black supply wire with the black floodlight wire, the white
supply wire with the white floodlight wire, and the bare or green supply wire with the
green/yellow floodlight wire. Make sure the ground wire is also screwed to the "GND"
threaded hole of the mounting bracket with the green ground screw.
LIVE (HOT) NEUTRAL
Black White
Power circuit wiring color codes
5 After wires are connected, carefully tuck them inside the junction box.
6 Place the floodlight unit (make sure the "UP" arrow on the back is pointing up) against
the junction box aligning with the center hole of the mounting bracket and lock it
securely with the provided long bracket screw and washer.
7 Insert the provided screw cap firmly into the center mounting hole on the floodlight
unit.
8
h
Englis
EN
INSTALLATION INSTRUCTIONS
GROUND (EARTH)
/
Bare copper or green
If wiring colors do not match — a common issue in
older homes — contact a licensed electrician who
will be able to help you check and identify the electrical
wiring. Do not guess the wires. Incorrect wire connection
will damage the unit and could cause fire or injury.