BaByliss PRO X2 VOLARE FX811 Manual Del Usuario página 6

Mounting the Blade
1. Set the taper control to 2.0.
You cannot mount the blade
in any other position or you
will damage the engagement.
2. Fit the mounting tab into the blade tongue on the clipper and
push in until it clicks.
10
CLIPPER CARE
Cleaning the Blade
1. Brush off any hairs from the clipper and from around the blade.
2. Remove the blade and brush off hairs from the blade edge.
3. Brush the hairs out from between the fixed comb blade and
the moving cutter blade while pressing down on the cleaning
lever to raise the moving cutter blade.
Note: Do not attempt to take
the blade apart or you will not
be able to use it again.
11