Checking Pack Contents; Safety - Honeywell RCA902N Instrucciones De Instalación

Detector de movimiento inalámbrico
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Checking Pack Contents

• Motion Detector
• Instruction Manual
Fixing pack containing:
• 2 slot-in Motion Detector window
masking curtains
• 2 fixing screws and plastic wall-plugs
You will also need:
• One 9V PP3 (6LR61) Alkaline Battery
Tools Required:
• No. 2 Phillips screwdriver
• 3mm flat-bladed screwdriver
• Drill
• 6mm masonry drill bit
69-2157EFS_C.indd 3

Safety

Always follow the manufacturer's
advice when using power tools, steps,
ladders etc. and wear suitable protec-
tive equipment (e.g. safety goggles)
when drilling holes etc.
Before drilling holes in walls, check
for hidden electricity cables and water
pipes, the use of a cable/pipe locater
maybe advisable if in doubt.
Do not attempt to install or program
this product while it is wet or raining.
Batteries (battery pack or batter-
ies installed) shall not be exposed to
excessive heat such as sunshine, fire or
the like; danger of damage if battery is
incorrectly replaced. Replace only with
the same or equivalent type.
3
RCA902A
69-2157EFS—05
9/22/2008 11:53:56 AM

Publicidad

Tabla de contenido
loading

Tabla de contenido