Run Schedule From Slideshow; Run Schedule From Calendar/Clock Screen; Set Date And Time; Set Alarm - Pandigital PAN7000DW Guia Del Usuario

CAUTION: After you select the
powering off) and the schedule will not take effect until you select this function again to re-activate.

Run Schedule from Slideshow

1. Start a slideshow and press
2. To run the schedule when the
Schedule
button when it appears.
3. The DPF will go into stand-by mode according to the schedule, and when it resumes operation, the slideshow will again begin to play.

Run Schedule from CALENDAR/CLOCK Screen

CALENDAR/CLOCK
1. On the
Run Schedule
2. Select
3. The DPF will go into stand-by mode according to the schedule, and when it resumes operation, the
A small timer clock will appear indicating the schedule is active, and then the DPF will operate according to the set schedule.

Set Date and Time

CALENDAR/CLOCK
1. On the
Set Date/Time
2. Select
Done
3. Select .

Set Alarm

You can use your DPF as an alarm clock when desired. You can set the frequency of the alarm, and set the alert to sound the built-in tone or play your
music file.
CALENDAR/CLOCK
1. On the
Set Alarm
2. Select
Alarm = set the time you want the alarm to alert.
Frequency = set how often you want the alarm to alert (Once, Daily, Off)
Alert = set the alert to Music or default Tone (if music, the music file must reside on the currently selected media when alarm is activated)
Done
3. Select .
When the alarm is set, a small alarm clock or music note will be displayed indicating the alarm alert has been set to either the default tone or music.
Note: At least one MP3 music file must be present on the selected media source for the alert to play music. If you set the alert to play music and there is no
MP3 music file present, the default tone will sound instead.
Turn Alarm Off
When the alarm sounds, press any button on the remote control to stop it and return to the
To cancel the alarm before its scheduled time, follow the previous instructions for setting the alarm and set the frequency to
W i - F i
This feature allows a wireless connection with multiple online photo sharing and streaming RSS content feed websites (i.e., Windows Live FrameIt). You will be able
to view images you have uploaded to these sites, as well as receiving streaming news, weather, traffic, and other content feeds directly through the DPF.
Use this feature to also connect wirelessly to your PC for easy file transfer (page 17).

Set up DPF to connect to Photo Sharing Websites

Setting up your DPF to connect with the photo sharing websites requires 3 steps:
A. Set up Wireless Network by assigning the wireless network ID and password on the DPF.
B. Establish an account with the online photo sharing website and upload your photos to their website. (
depending on the DPF models
C. Assign your photo sharing website User ID and password on the DPF to connect with the site and view your uploaded photos directly through the
DPF.

The Virtual Keyboard

You will use a virtual keyboard for entering your wireless network ID and password, as well as the User ID and Passwords associated with your online photo
sharing accounts.
Navigate the keyboard keys as follows:
Use the remote control
multiple times as needed, to select the desired characters
SYM
= Access the following symbols:
\ / : ; ( ) $ & [ ] . , % ^ + = - | < > { } ! ~
14
Run Schedule
function, any user intervention will cancel the activation (i.e., pressing remote or control button,
ENTER
to select the
Run Schedule
button is no longer displayed, restart your slideshow and then press
MENU
screen, press
.
MENU
screen, press
, and then select the options and use
MENU
screen, press
, and then select the options and use
.)
buttons to highlight the keys, and then press
Run Schedule
button when it appears in the lower left corner of the screen (approx 10 sec).
.
.
to change the field values.
.
to change the field values.
ENTER
ENTER
Calendar/Clock
CLOCK/CALENDAR
screen.
The available online photo sharing websites vary
,
Run
to select the
screen will again be displayed.
OFF
.