PowerWalker VFI 10000CP 3/3 Manual De Instrucciones página 32

Battery Test
EN
Warning
status
Description When UPS is in AC mode or CVCF mode, press "Test" key for more than 0.5s.
Then, the UPS will beep once and start "Battery Test". The line between I/P
and inverter icons will blink to remind users. This operation is used to check
the battery status.
LCD display
Description If some errors occur in the UPS (but it is still running normally), it will show
one more screen to represent the warning situation. In the warning screen,
the icon
code indicates one error. You can find the code meaning in the warning
code table.
LCD display
will be flashing, and it can show up to 3 error codes and each
27