Adjusting The Headphone Volume - Sennheiser EK 3041-U Instrucciones Para El Uso

17 Adjusting the headphone volume

Briefly press the SET button once.
The display now indicates „PHonE" in alternation with a three-digit number
indicating the current volume level at the headphone output of your EK 3041-
U receiver. The adjustment range of the headphone volume is between 0 an
126 (on the display).
The headphone output can only be used if the receiver is not inserted in
the slot-in facility of a camcorder but is operated as a stand-alone receiver,
e.g. inserted into a special housing (accessory). If the receiver is inserted
in the slot-in facility of a camcorder, the headphone volume cannot be
adjusted and the menu is skipped.
With the
Selecting a smaller value reduces the volume, selecting a higher value
increases the volume.
The new setting becomes effective immediately without having to be
stored.
Notes
You can discontinue the programming of this menu at any time. Press the
SET button to change to the next menu or briefly press the ON/OFF
switch to discontinue your entry. The cancellation is briefly confirmed on
the display with „ESC". The display then switches back to the standard
display (display of receiving frequency or channel number)(u see
chapter 16).
After about 15 seconds, the receiver automatically returns to normal
operation if no entry has been made during this period. Here, too, „ESC"
flashes briefly.
40
/ buttons you can now select a different volume setting.